Netgear XSM4324FS User Manual - Page 455

M4300 Intelligent Edge Series Fully Managed Stackable Switches 11. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 173. IPv6 PIM Interface Configuration Field Protocol State IPv6 Prefix/Length Designated Router Neighbor Count Description The state of PIM in the router. either Operational or Non-Operational. The IPv6 address prefix and the length of the selected interface. The designated router on the selected PIM interface. The number of PIM neighbors on the selected interface. View the IPv6 PIM Neighbor To view the IPv6 PIM neighbor: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 Multicast > IPv6 PIM > PIM Neighbor. 5. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 174. IPv6 PIM Neighbor Field Interface Neighbor IP Description The interface on which the neighbor is displayed. The IP address of the PIM neighbor for this entry. Configure Multicast Routing 455 User Manual