Netgear XSM4324FS User Manual - Page 135

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. In the User Name list, select the user account to be configured. The SNMP v3 Access mode field indicates the SNMPv3 access privileges for the user account. The admin account has read/write access, and all other accounts are assigned read-only access. 6. Select an Authentication Protocol radio button. The valid Authentication Protocols are None, MD5 or SHA: • If you select None, the user cannot access the SNMP data from an SNMP browser. • If you select MD5 or SHA, the user login password are used as the SNMPv3 authentication password, and you must therefore specify a password, and it must be eight characters long. This specifies the SNMPv3 Authentication Protocol setting for the selected user account. 7. Select a Encryption Protocol radio button. The valid Encryption Protocols are None or DES: • If you select the DES Protocol you must enter a key in the Encryption Key field. • If None is specified for the Protocol, the Encryption Key is ignored. This specifies the SNMPv3 Encryption Protocol setting for the selected user account. 8. If you selected DES in the Encryption Protocol field, enter the encryption key in the SNMPv3 Encryption Key field. If you did not select DES, this field is ignored. Valid keys are 0 to 15 characters long. 9. Click the Apply button. Your settings are saved. Configure System Information 135 User Manual