Netgear XSM4324FS User Manual - Page 560

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure Private Groups To configure a traffic control private group: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Traffic Control > Private Group > Private Group Configuration. 5. In the Group Name field, enter the private group name. The name can be up to 24 bytes of non-blank characters. 6. In the optional Group ID field, specify the private group identifier. The range of group ID is 1 to 192. 7. In the Group Mode list, select the mode of private group. The group mode can be either isolated or community. When in isolated mode, the member port in the group cannot forward its egress traffic to any other members in the same group. By default, the mode is community mode that each member port can forward traffic to other members in the same group, but not to members in other groups. 8. Click the Add button. The private group is created in the switch. Configure Private Group Membership To configure private group membership: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. Manage Switch Security 560 User Manual