Netgear XSM4324FS User Manual - Page 190

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the nonconfigurable information displayed on the page. Table 67. VLAN Status Field VLAN ID VLAN Name VLAN Type Routing Interface Member Ports Definition The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is 1 to 4093. The name of the VLAN. VLAN ID 1 is always named `Default`. The VLAN type: • Default (VLAN ID = 1). Always present • Static. A VLAN that you configured • Dynamic. A VLAN created by GVRP registration that you did not convert to static, and that GVRP can therefore remove The interface associated with the VLAN, in the case that VLAN routing is configured for this VLAN. The ports that are included in the VLAN. Configure Port PVID Settings You can assign a port VLAN ID (PVID) to an interface. There are certain requirements for a PVID: • You must define a PVID for all ports. • If no other value is specified, the default VLAN PVID is used. • To change the port's default PVID, you must first create a VLAN that includes the port as a member. • Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port. To configure PVID settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> VLAN > Advanced > Port PVID Configuration. Configure Switching Information 190 User Manual