Netgear XSM4324FS User Manual - Page 263

M4300 Intelligent Edge Series Fully Managed Stackable Switches membership. The value is equal to the tenths of a second. The range is from 1 to 100 tenths. The factory default is 5 tenths or one-half. 8. Use MVR Mode to specify the MVR mode of operation. Possible values are compatible or dynamic. The factory default is compatible. 9. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 93. MVR Configuration Field MVR Max Multicast Groups MVR Current Multicast Groups Definition The maximum number of multicast groups that MVR supports. Displays current number of the MVR groups allocated. Configure Advanced MVR Settings To configure advanced MVR settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching > MVR > Advanced > MVR Configuration. 5. Select the MVR Running Enable or Disable radio button. The factory default is Disable. Configure Switching Information 263 User Manual