Netgear XSM4324FS User Manual - Page 335

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Use VLAN ID to specify the VLAN identifier (VID) associated with this VLAN. The range of the VLAN ID is 1 to 4093. 6. Use Ports to display selectable physical ports and LAGs (if any). Selected ports are added to the routing VLAN. Each port has three modes: • T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged. The ports that are selected are included in the VLAN. • U (Untagged). Select the ports on which all frames transmitted for this VLAN are untagged. The ports that are selected are included in the VLAN. • BLANK(Autodetect). Select the ports that can be dynamically registered in this VLAN through GVRP. This selection has the effect of excluding a port from the selected VLAN. 7. Use the LAG Enabled option to add selected ports to VLAN as a LAG. The default is No. 8. Use IP Address to define the IP address of the VLAN interface. 9. Use Network Mask to define the subnet mask of the VLAN interface. 10. Click the Apply button. Your settings are saved. Configure VLAN Routing To configure VLAN routing: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> VLAN > VLAN Routing. 5. Select the VLAN ID. Manage Routing 335 User Manual