Netgear XSM4324FS User Manual - Page 563

M4300 Intelligent Edge Series Fully Managed Stackable Switches 9. Click the Apply button. Your settings are saved. Set Up Private VLANs A private VLAN contains switch ports that cannot communicate with each other, but can access another network. These ports are called private ports. Each private VLAN contains one or more private ports and a single uplink port or uplink aggregation group. Note that all traffic between private ports is blocked at all Layers, not just Layer 2 traffic, but also traffic such as FTP, HTTP, and Telnet. Configure a Private VLAN Type To configure a private VLAN type: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Traffic Control > Private VLAN > Private VLAN Type Configuration. 5. Use Private VLAN Type to select the type of private VLAN. The factory default is Unconfigured. 6. Click the Apply button. Your settings are saved. The VLAN ID field specifies the VLAN ID for which the private VLAN type is being set. The factory default is Unconfigured. Manage Switch Security 563 User Manual