Netgear XSM4324FS User Manual - Page 64

M4300 Intelligent Edge Series Fully Managed Stackable Switches 13. To make changes, do the following: • To add or remove the IPv6 default route, select the Change IPv6 Default Route option, and specify the address value in the IPv6 Default Route Address field. • In the Reset IPv6 Management Interface section of the page, use the Set Management Interface to Default option to delete the port-based IPv6 management interface configuration and set the IPv6 management interface back to the default VLAN 1. 14. If you make any changes, click the Apply button. Your settings are saved. The current IPv6 Management Interface Status is displayed at the bottom of the page. The table below describes the nonconfigurable fields. Table 19. Current IPv6 Management Interface Status Field Description Management Interface Displays the current IPv6 management interface Link State Indicates whether the link status is up or down. IPv6 Routing Interface Status/Operational Mode Indicates whether the link status is up or down for the management interface. MAC Address The MAC address assigned to the management interface. IP Address Configuration Method Indicates whether the IP address configuration method is DHCP or manual. IP Address The IP address of the management interface. Subnet Mask The IP subnet mask for the management interface. Gateway The specified default gateway for the management interface. Configure System Information 64 User Manual