Netgear XSM4324FS User Manual - Page 466
View IPv6 MLD Proxy Interface Statistics, Apply, admin, Login
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 466 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The unsolicited report interval is the time between repetitions of a host's initial report of membership in a group. Valid values are 1 to 260. The default value is 1. 8. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 180. IPv6 Multicast MLD Proxy Interface Configuration Field IPv6 Prefix Prefix Length Operational Mode Querier Address on Proxy Interface Number of Groups Version Version 1 Querier Timeout Proxy Start Frequency Description The IPv6 address of the MLD proxy interface. The prefix length for the IPv6 address of the MLD proxy interface. The operational state of MLD proxy interface. The querier address on the proxy interface. The current number of multicast group entries for the MLD proxy interface in the cache table. This field is configurable only when MLD proxy interface mode is enabled. Enter the version of MLD to configure on the selected interface. Valid values are 1 to 2. The default version is 3. The older MLD version 1 querier time-out value in seconds. The older version querier Interval is the time-out for transitioning a host back to MLDv2 mode once an older version query is heard. When an older version query is received, hosts set their older version querier present timer to Older Version querier Interval. The number of times the proxy was brought up. View IPv6 MLD Proxy Interface Statistics To view the IPv6 multicast MLD proxy interface statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Multicast Routing 466 User Manual