Netgear XSM4324FS User Manual - Page 308

M4300 Intelligent Edge Series Fully Managed Stackable Switches 8. Use ICMP Rate Limit Interval to control the ICMP error packets by specifying the number of ICMP error packets that are allowed per burst interval. By default, the rate limit is 100 packets/sec, (the burst interval is 1000 msec). To disable ICMP Ratelimiting set this field to 0. The valid rate interval is in the range 0 to 2147483647. 9. Use ICMP Rate Limit Burst Size to control the ICMP error packets by specifying the number of ICMP error packets that are allowed per burst interval. By default, the burst size is 100 packets. When the burst interval is 0, then configuring this field is not a valid operation. The valid burst size is 1 to 200. 10. Use Select to Configure Global Default Gateway to edit the Global Default Gateway field. 11. Use Global Default Gateway to set the global default gateway to the manually configured value. A default gateway configured with this command is more preferred than a default gateway learned from a DHCP server. Only one default gateway can be configured. If you invoke this command multiple times, each command replaces the previous value. 12. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 109. Routing IP Configuration Field Default Time to Live Maximum Next Hops Maximum Routes Maximum Static Routes Description The default value inserted into the Time-To-Live field of the IP header of datagrams originated by the switch, if a TTL value is not supplied by the transport layer protocol. The maximum number of hops supported by the switch. This is a compile-time constant. The maximum number of routes (routing table size) supported by the switch. This is a compile-time constant. The maximum number of static routes supported by the switch. View IP Statistics The statistics reported on this page are as specified in RFC 1213. To view IP statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Manage Routing 308 User Manual