Netgear XSM4324FS User Manual - Page 416

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > OSPFv3 > Advanced > NSF OSPFv3 Summary. 5. From the Support mode list, select one of the following values: • Always. OSPF performs a graceful restart for all planned and unplanned warm restart events. • Disabled. Prevents OSPF from performing graceful restarts. • Planned. OSPF performs a graceful restart only when a restart is planned (for example, due to an initiate failover command). The default is Disabled. This setting configure how the unit performs graceful restarts. 6. Configure the Restart Interval. The valid values are 0 to 1800 in seconds. The default is 120 seconds. 7. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 151. Advanced NSF OSPFv3 Summary Field Restart Status Restart Age (seconds) Description The restart status of OSPF helper feature. The possible values are as follows: • Not Restarting • Planned Restart • Unplanned Restart The amount of time since the last restart occurred. Configure OSPF and OSPFv3 416 User Manual