Netgear XSM4324FS User Manual - Page 341

M4300 Intelligent Edge Series Fully Managed Stackable Switches • None. Selected if the user does not want to delete any entry from the ARP Table. • Remove IP Address. This field displays only if you select Specific Dynamic/Gateway Entry or Specific Static Entry in the Remove from Table list. The Remove IP Address field allows you to enter the IP address against the entry that is to be removed from the ARP table. 11. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 121. ARP Table Configuration Field Total Entry Count Peak Total Entries Active Static Entries Configured Static Entries Maximum Static Entries Description Total number of entries in the ARP table. Highest value reached by Total Entry Count. This counter value is restarted whenever the ARP table Cache Size value is changed. Total number of active static entries in the ARP table. Total number of configured static entries in the ARP table. Maximum number of static entries that can be defined. Configure RIP Enable RIP To enable RIP: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > RIP > Basic > RIP Configuration. Manage Routing 341 User Manual