Netgear XSM4324FS User Manual - Page 155

M4300 Intelligent Edge Series Fully Managed Stackable Switches 6. Use Timer to specify the period of time between sending new ISDP packets. The range is 5 to 254 seconds. The default value is 30 seconds. 7. Use Hold Time to specify the hold time for ISDP packets that the switch transmits. The hold time specifies how long a receiving device must store information sent in the ISDP packet before discarding it. The range 10 to 255 seconds. The default value is 180 seconds. 8. Select the Version 2 Advertisements Disable or Enable radio button. This enables or disables the sending of ISDP version 2 packets from the device. The default value is Enabled. 9. Click the Apply button. Your settings are saved. The following table describes the ISDP Basic Global Configuration fields. Table 55. ISDP Basic Global Configuration Field Description Neighbors table last time changed Specifies if Device ID The device ID of this switch. Device ID Format Capability The device ID format capability. Device ID Format The device ID format. Configure ISDP Global Settings To configure ISDP global settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > ISDP > Advanced > Global Configuration. Configure System Information 155 User Manual