Netgear XSM4324FS User Manual - Page 204

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching > Auto-VoIP > OUI-based > Port Settings. The Operational Status field displays the current operational status of each interface. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure. 6. In the Auto VoIP Mode field, select Disable or Enable. Auto-VoIP is disabled by default. 7. Click the Apply button. Your settings are saved. Add a New Entry to the OUI Table To add a new entry to the OUI table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. Configure Switching Information 204 User Manual