Netgear XSM4324FS User Manual - Page 510

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure RADIUS Accounting Servers To configure a RADIUS accounting server: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Management Security > RADIUS > Accounting Server Configuration. 5. In the Accounting Server IP Address field, specify the IP address of the RADIUS accounting server. 6. In the Accounting Server Name field, enter the name of the accounting server. 7. In the Port field, specify the UDP port number the server uses to verify the RADIUS accounting server. The valid range is 0-65535. If the user has read-only access, the value is displayed but cannot be changed. 8. From the Secret Configured list, select Yes to add a RADIUS secret in the next field. After you add the RADIUS accounting server, this field indicates whether the shared secret for this server is configured. 9. In the Secret field, type the shared secret to use with the specified accounting server. 10. From the Accounting Mode list, enable or disable the RADIUS accounting mode. 11. Click the Apply button. Your settings are saved. Manage Switch Security 510 User Manual