Netgear XSM4324FS User Manual - Page 547

M4300 Intelligent Edge Series Fully Managed Stackable Switches - Force authorized. The authenticator PAE unconditionally sets the controlled port to authorized. - Auto. The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator, and the authentication server. - MAC Based. The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator, and the authentication server on a per supplicant basis. - N/A. The control mode is not applicable. • Use MAB to enable or disable MAC-based. The default selection is Disable. The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator, and the authentication server on a per-supplicant basis. • Quiet Period. This input field allows you to configure the quiet period for the selected port. This command sets the value in seconds of the timer used by the authenticator state machine on this port to define periods of time in which it does not attempt to acquire a supplicant. The quiet period is the period for which the authenticator does not attempt to acquire a supplicant after a failed authentication exchange with the supplicant. The quiet period must be a number in the range of 0 and 65535. A quiet period value of 0 means that the authenticator state machine never acquires a supplicant. The default value is 60. Changing the value does not change the configuration until you click the Apply button. • Transmit Period. This input field allows you to configure the transmit period for the selected port. The transmit period is the value, in seconds, of the timer used by the authenticator state machine on the specified port to determine when to send an EAPOL EAP request/identity frame to the supplicant. The transmit period must be a number in the range of 1 and 65535. The default value is 30. Changing the value does not change the configuration until the Apply button is clicked. • GuestVLAN ID. This field allows you to configure guest VLAN ID on the interface. The valid range is 0-4093.The default value is 0. Changing the value does not change the configuration until the Apply button is clicked. Enter 0 to clear the guest VLAN ID on the interface. • Guest VLAN Period. This input field allows the user to enter the guest VLAN period for the selected port. The guest VLAN period is the value, in seconds, of the timer for guest VLAN authentication. The guest VLAN time-out must be a value from 1 to 300. The default value is 90. Changing the value does not change the configuration until the Apply button is clicked. • Unauthenticated VLAN ID. Enter the unauthenticated VLAN ID for the selected port. The valid range is 0-4093.The default value is 0. Changing the value does not change the configuration until the Apply button is clicked. Enter 0 to clear the unauthenticated VLAN ID on the interface. • Supplicant Timeout. Enter the supplicant time-out for the selected port. The supplicant time-out is the value, in seconds, of the timer used by the authenticator state machine on this port to time-out the supplicant. The supplicant time-out must be Manage Switch Security 547 User Manual