Netgear XSM4324FS User Manual - Page 322

M4300 Intelligent Edge Series Fully Managed Stackable Switches 12. In the Autonomous Flag list, select Enable or Disable. This specifies whether the selected prefix can be used for autonomous address configuration. The default value is Enable. 13. Click the Add button. The IPv6 address is added to the interface. 14. Click the Apply button. Your settings are saved. The Current State field displays the state of the IPV6 address. The state is TENT if routing is disabled or DAD fails. The state is Active if the interface is active and DAD is successful. View IPv6 Statistics To view IPv6 interface statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 > Advanced > Statistics. Manage Routing 322 User Manual