Netgear XSM4324FS User Manual - Page 598

M4300 Intelligent Edge Series Fully Managed Stackable Switches The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Control > Captive Portal > CP Trap Flags. 5. Select the CP Trap Mode Disable or Enable radio button. This sets the option to enable or disable the captive portal trap mode. 6. Select the Client Authentication Failure Disable or Enable radio button. If you enable this, the SNMP agent sends a trap when a client attempts to authenticate with a captive portal but is unsuccessful. 7. Select the Client Connect Disable or Enable radio button. If you enable this, the SNMP agent sends a trap when a client authenticates with, and connects to, a captive portal. 8. Select the Client Database Full Disable or Enable radio button. If you enable this, the SNMP agent sends a trap each time an entry cannot be added to the client database because it is full. 9. Select the Client Disconnect Disable or Enable radio button. If you enable this, the SNMP agent sends a trap when a client disconnects from a captive portal. 10. Click the Apply button. Your settings are saved. View and Clear the Captive Portal Client You can view and clear information about the traffic a client sent or received. To view and clear the captive portal client: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Manage Switch Security 598 User Manual