Netgear XSM4324FS User Manual - Page 567

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure a Private VLAN Promiscuous Interface To configure a private VLAN promiscuous interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous Interface Configuration. 5. Use Promiscuous Primary VLAN to set the primary VLAN ID for Promiscuous Association mode. The range of the VLAN ID is 2-4093. 6. Use Promiscuous Secondary VLAN ID(s) to set the secondary VLAN ID list for Promiscuous Association mode. This field can accept single VLAN ID or range of VLAN IDs or a combination of both in sequence separated by ','. You can specify individual VLAN ID, such as 10. You can specify the VLAN range values separated by a hyphen, for example, 10-13. You can specify the combination of both separated by commas, for example: 12,15,40-43,1000-1005, 2000. The range of the VLAN ID is 2-4093. Note: The VLAN ID List given in this control replaces the configured secondary VLAN list in the association. 7. Click the Apply button. Your settings are saved. Manage Switch Security 567 User Manual