Netgear XSM4324FS User Manual - Page 122

M4300 Intelligent Edge Series Fully Managed Stackable Switches You take one of the following actions: • In the Go To Interface field, enter the interface in unit/slot/port format and click the Go button. The entry corresponding to the specified interface is selected. • Select the check box from the list of Interfaces configured for DHCPv6 Relay functionality. 6. In the Admin mode field, specify the DHCPv6 mode, either Enable or Disable, to configure DHCPv6 Relay functionality. The default is Disable. DHCPv6 server and DHCPv6 relay functions are mutually exclusive. 7. From the Relay Interface list, select an interface to reach a relay server. 8. In the Destination IP Address, specify an IPv6 address to reach a relay server. 9. In the Remote ID field, specify the relay agent information option. The remote ID is derived from the DHCPv6 server DUID and the relay interface number, or it can be specified as a user-defined string. 10. Click the Apply button. Your settings are saved. Configure Power over Ethernet Note: Power over Ethernet (PoE) is supported on models M4300-16X, M4300-28G-POE+, M4300-52G-POE+, and M4300-96X. The latter model requires one or more APM408 port cards. Configure Basic PoE Settings To configure basic PoE settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > PoE > Basic > PoE Configuration. Configure System Information 122 User Manual