Netgear XSM4324FS User Manual - Page 656

M4300 Intelligent Edge Series Fully Managed Stackable Switches 8. From the Filter Type list, select the IP or MAC ACL that can mirror traffic that matches a permit rule. Possible values are as follows: • None. No filter is configured for the session. • IP ACL. Configure the IP access-list ID or name ACL. The ID of the IP ACL to apply to traffic from the source. Only traffic that matches the rules in the ACL is mirrored to the destination. • MAC ACL. Configure MAC ACL.The ID of the MAC ACL to apply to traffic from the source. Only traffic that matches the rules in the ACL is mirrored to the destination. The default value is None. 9. In the Filter Name field, enter the name of the filter, if it is configured for the session. 10. Click the Apply button. Your settings are saved. Configure The Port Mirroring Source Interface Note: If an interface participates in a VLAN and is a LAG member, the VLAN cannot be assigned as a source VLAN for a monitor session. At the same time, if an interface participates in a VLAN and this VLAN is assigned as a source VLAN for a monitor session, the interface can be assigned as a LAG member. To configure port mirroring source interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Mirroring > Multiple Port Mirroring. Monitor the Switch and Network 656 User Manual