Netgear XSM4324FS User Manual - Page 28

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 4. Port numbering for the APM408C, APM408P, and APM408F port cards (continued) Slot Slot Number Location Port Number Port Number Interface Convention for Upper Ports for Lower Ports in Port Card in Port Card 11 Lower row 1, 3, 5, 7 2, 4, 6, 8 1/11/1, 1/11/2, 1/11/3, and so on through 1/11/8 12 Lower row 1, 3, 5, 7 2, 4, 6, 8 1/12/1, 1/12/2, 1/12/3, and so on through 1/12/8 Slot and Port Numbering on the APM402XL Port Card The numbering of the ports on the APM402XL port card is different from the other port cards. You can use a 40G port either with a break-out cable, in which case the single 40G port can support up to four individual 10G ports, or with a connection to another single 40G port. Port 1 (the left 40G port on the port card) uses the following numbering: • If connected with a break-out cable to four individual 10G ports, the port numbers are 1, 2, 3, and 4. • If connected to another single 40G port, the port number is 1. In that situation, only port number 1 is used and port numbers 2, 3, and 4 are not used on the port card. Port 2 (the right 40G port on the port card) uses the following numbering: • If connected with a break-out cable to four individual 10G ports, the port numbers are 5, 6, 7, and 8. • If connected to another single 40G port, the port number is 5. In that situation, only port number 5 is used and port numbers 6, 7, and 8 are not used on the port card. For example, if a switch with unit number 1 includes an APM402XL port card in slot 9, port 1 on the port card is connected to four individual port cards, and port 2 on the port card is connected to another single 40G port, the port numbering is as follows: 1/9/1, 1/9/2, 1/9/3, 1/9/4, and 1/9/5. For the APM402XL port card, the ports on the port cards in the slots are numbered as described in the following table. (In the interface convention examples in the table, the switch is designated as unit number 1.) For the APM402XL port card, the ports in the port cards in the slots are numbered as described in the following table. Get Started 28 User Manual