Netgear XSM4324FS User Manual - Page 241

M4300 Intelligent Edge Series Fully Managed Stackable Switches The System Information page displays. 4. Select Switching> Multicast > IGMP Snooping > Interface Configuration. The page lists all physical, VLAN, and LAG interfaces. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the interface that you want to configure 6. From the Admin Mode menu, select Disable or Enable. This selection enables or disables the administrative mode for IGMP snooping for the interface. The default is Disable. 7. In the Membership Interval field, specify the period that the switch waits for a group report before it removes the interface as a member of the group. Enter a value between 1 and 3600 seconds. The default is 600 seconds. 8. In the Max Response Time field, specify the period that the switch waits after it sent a query on an interface because it did not receive a report from a group on that interface. Enter a value that is 1 or greater but less than the value in the Membership Interval field. The default is 120 seconds. 9. In the Expiration Time field, specify the period that the switch waits to receive a query on the interface before it removes the interface from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds, which indicates an infinite time-out (no expiration). Configure Switching Information 241 User Manual