Netgear XSM4324FS User Manual - Page 287

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. To configure one or more ports or LAGs, select the check box next to each port or LAG to configure. You can select multiple ports to apply the same settings to the selected interfaces. 6. In the MVRP Mode field, select Enable or Disable. This specifies the administrative mode of Multiple VLAN Registration Protocol (MVRP) on the interface. MVRP registers VLANs in the network, enabling automatic VLAN configuration on the device. 7. In the MMRP Mode field, select Enable or Disable. This specifies the administrative mode of Multiple MAC Registration Protocol (MMRP) on the interface. MMRP allows the propagation of MAC address information in the network and allows for the registration and deregistration of both individual MAC address information and group MAC address membership. 8. Use the MRP Join Timer field to configure the amount of time in centiseconds to wait for JoinIn messages from other MRV participants after the interface sends a Join message. If the amount of time specified in this field passes before the interface receives a JoinIn message, the interface resends the Join message. The range is 10 to 100 centiseconds. The default value is 20. 9. Use the MRP Leave Timer field to configure the amount of time in centiseconds to wait before the interface deregisters attributes from other MRV participants. If the interface receives Join messages from other participants before the Leave timer expires, the attributes are not deregistered. The range is 20 to 600 centiseconds. The default value is 300. 10. Use the MRP Leave All Timer field to configure the amount of time to wait, after the interface starts the MRP registration process, before the participants refresh and reregister their attributes. The range is 200 to 6000 centiseconds. The default value is 2000. 11. Click the Apply button. Your settings are saved. View MMRP and Clear Statistics You can view and clear information regarding the MMRP frames transmitted and received by the switch and by each interface. To view and clear MMRP statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. Configure Switching Information 287 User Manual