Netgear XSM4324FS User Manual - Page 332

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. In the OSPFv3 Inter field, specify the OSPFv3 inter route preference value in the router. The range is 1 to 255. The default value is 110. 8. In the OSPFv3 External field, specify the OSPFv3 external route preference value in the router. The range is 1 to 255. The default value is 110. 9. Click the Apply button. Your settings are saved. The Local field displays the local preference. Configure IPv6 Tunnels You can create, configure, and delete tunnels. To configure an IPv6 tunnel: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 > Advanced > Tunnel Configuration. 5. In the Tunnel ID field, select from the list of available tunnel IDs. 6. In the Mode list, select a supported mode: • 6-in-4-configured • 6-to-4 7. Select the IPv6 Mode from the list. 8. Enable IPv6 on this interface using the IPv6 address. This option is configurable only until you specify an explicit IPv6 address. 9. From the IPv6 Unreachables list, select to Enable or Disable. Manage Routing 332 User Manual