Netgear XSM4324FS User Manual - Page 648

M4300 Intelligent Edge Series Fully Managed Stackable Switches Enable or Disable Console Logging This allows logging to any serial device attached to the host. To enable or disable console logging: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Logs > Console Log Configuration. 5. Select the Admin Status Disable or Enable radio button. A log that is disabled does not log messages. 6. Severity Filter. A log records messages equal to or above a configured severity threshold. Select the severity option by selecting the corresponding line on the drop-down entry field. These severity levels are available: • Emergency (0). The system is unusable. • Alert (1). Action must be taken immediately. • Critical (2). Critical conditions. • Error (3). Error conditions. • Warning (4). Warning conditions. • Notice (5). Normal but significant conditions. • Informational (6). Informational messages. • Debug (7). Debug-level messages. 7. Click the Apply button. Your settings are saved. Monitor the Switch and Network 648 User Manual