Netgear XSM4324FS User Manual - Page 138

M4300 Intelligent Edge Series Fully Managed Stackable Switches 4. Select System > LLDP > Interface Configuration. 5. Use Go To Port to enter the Port in unit/slot/port format and click the Go button. The entry corresponding to the specified Port, is selected. 6. Use Port to specify the list of ports on which LLDP - 802.1AB can be configured. The Link Status field indicates whether the link is up or down. 7. Use Transmit to specify the LLDP - 802.1AB transmit mode for the selected interface. 8. Use Receive to specify the LLDP - 802.1AB receive mode for the selected interface. 9. Use Notify to specify the LLDP - 802.1AB notification mode for the selected interface. 10. Optional TLV(s): • Use Port Description to include port description TLV in LLDP frames. • Use System Name to include system name TLV in LLDP frames. • Use System Description to include system description TLV in LLDP frames. • Use System Capabilities to include system capability TLV in LLDP frames. 11. Use Transmit Management Information to specify whether management address is transmitted in LLDP frames for the selected interface. 12. Click the Apply button. Your settings are saved. View LLDP Statistics To view LLDP statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. Configure System Information 138 User Manual