Netgear XSM4324FS User Manual - Page 540

M4300 Intelligent Edge Series Fully Managed Stackable Switches 21. Select the Denial of Service UDP Port Disable or Enable radio button. Enabling UDP Port DoS prevention causes the switch to drop packets with UDP source port equal to UDP destination port. The factory default is Disable. 22. Click the Apply button. Your settings are saved. Configure Access Control Settings You can configure an access control profile and associate an access control rule with the profile. The switch supports one access control profile only. To complete set up a profile with a rule, follow the procedures that are described in the following sections: 1. Configure an Access Control Profile on page 540 2. Configure Access Rule Settings for the Access Control Profile on page 542 Configure an Access Control Profile To configure the access profile settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Access > Access Control > Access Profile Configuration. Manage Switch Security 540 User Manual