Netgear XSM4324FS User Manual - Page 554

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. From the VLAN ID list, select the VLAN to use with the MAC address to fully identify packets to be filtered. You can change this field only when Create Filter is selected from the MAC Filter list. 8. In the MAC Address field, specify the MAC address of the filter in the format 00:01:1A:B2:53:4D. You can change this field when you select the Create Filter option. You cannot define filters for the following MAC addresses: • 00:00:00:00:00:00 • 01:80:C2:00:00:00 to 01:80:C2:00:00:0F • 01:80:C2:00:00:20 to 01:80:C2:00:00:21 • FF:FF:FF:FF:FF:FF 9. Use Source Port Members to list the ports to be included in the inbound filter. If a packet with the MAC address and VLAN ID you selected is received on a port that is not in the list, it is dropped. 10. Use Destination Port Members to list the ports to be included in the outbound filter. Packets with the MAC address and VLAN ID you selected are transmitted only from ports that are in the list. Destination ports can be included only in the multicast filter. 11. Click the Apply button. Your settings are saved. MAC Filter Summary To view the MAC filter summary: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Traffic Control > MAC Filter > MAC Filter Summary. Manage Switch Security 554 User Manual