Netgear XSM4324FS User Manual - Page 365

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > OSPF > Advanced > Common Area Configuration. 5. Enter the OSPF Area ID. An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to which a router interface connects. 6. Take one of the following actions: • Click the Add button. The area ID is added. • Click the Delete button. The area ID is deleted. The following table describes the nonconfigurable information that is displayed. Table 130. OSPF Common Area Configuration Field External Routing SPF Runs Area Border Router Count Area LSA Count Description A definition of the router's capabilities for the area, including whether or not AS-external-LSAs are flooded into/throughout the area. If the area is a stub area, then these are the possible options for which you can configure the external routing capability; otherwise, the only option is Import External LSAs. • Import External LSAs. Import and propagate external LSAs. • Import No LSAs. Do not import and propagate external LSAs. The number of times that the intra-area route table was calculated using this area's link state database. This is typically done using Dijkstra's algorithm. The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF pass. The total number of link state advertisements in this area's link state database, excluding AS external LSAs. Configure OSPF and OSPFv3 365 User Manual