Netgear XSM4324FS User Manual - Page 92
Con the Green Ethernet EEE LPI History, To con the port Green Mode EEE history, admin
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 31. Green Ethernet Feature Summary (continued) Field Description Interface Interface for which data is displayed or configured. Energy Detect Admin mode Enable or disable Energy Detect mode on the port. When this mode is enabled, when the port link is down, the PHY automatically goes down for a short period of time, then wakes up to check link pulses. This allows the switch to perform autonegotiation and save power consumption when no link partner is present. Energy Detect Operational Status Current operational status of the Energy Detect mode. Short Reach Admin mode Enable or disable Short Reach Admin mode on the port. With Short Reach mode enabled, PHY is forced to operate in low power mode irrespective of the cable length. Short Reach Operational Status Current operational status of the Short Reach mode. EEE Admin mode Enable or disable Energy Efficient Ethernet mode on the port. With EEE mode enabled, the port transitions to low power mode during link idle conditions. The following table describes the nonconfigurable fields. Table 32. Green Ethernet Interface Summary Field Interface EEE Admin mode Description Interface for which data is displayed or configured. Enable or disable Energy Efficient Ethernet mode on the port. When EEE mode is enabled, the port transitions to Low Power mode during Link Idle condition. If EEE Admin Mode is not supported, then N/A is displayed. Configure the Green Ethernet EEE LPI History To configure the port Green Mode EEE history: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System Management Green Ethernet Green Ethernet LPI History. Configure System Information 92 User Manual