Netgear XSM4324FS User Manual - Page 185

M4300 Intelligent Edge Series Fully Managed Stackable Switches 4. Select Switching> VLAN > Advanced > VLAN Configuration. 5. In the Internal VLAN Allocation Base field, specify the VLAN allocation base for the routing interface. You can enter a value from 1 to 4093. 6. Select the Internal VLAN Allocation Policy Ascending or Descending radio button. This specifies a policy for the internal VLAN allocation. 7. Click the Apply button. Your settings are saved. Configure VLAN Trunking You can configure switchport mode settings on interfaces. The switchport mode defines the purpose of the port based on the type of device it connects to and constraints the VLAN configuration of the port accordingly. Assigning the appropriate switchport mode helps simplify VLAN configuration and minimize errors. To configure VLAN trunking: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Switching Information 185 User Manual