Netgear XSM4324FS User Manual - Page 639
Total Received Packets Not, Packets Transmitted 128-255
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 639 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 222. Port Detailed Statistics (continued) Field Description Alignment Errors The total number of packets received with a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad frame check sequence (FCS) with a nonintegral number of octets. Rx FCS Errors The total number of packets received with a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad frame check sequence (FCS) with an integral number of octets Overruns The total number of frames discarded because this port was overloaded with incoming packets, and could not keep up with the inflow. Total Received Packets Not A count of valid frames received that were discarded (that is, filtered) by the Forwarded forwarding process. 802.3x Pause Frames Received A count of MAC control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. Unacceptable Frame Type The number of frames discarded from this port due to being an unacceptable frame type. Total Packets Transmitted (Octets) The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of Ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects must be sampled before and after a common interval. Packets Transmitted 64 Octets The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). Packets Transmitted 65-127 The total number of packets (including bad packets) received that were between Octets 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). Packets Transmitted 128-255 The total number of packets (including bad packets) received that were between Octets 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). Packets Transmitted 256-511 The total number of packets (including bad packets) received that were between Octets 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). Packets Transmitted 512-1023 Octets The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). Packets Transmitted 1024-1518 Octets The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). Packets Transmitted > 1518 Octets The total number of packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter has a max increment rate of 815 counts per sec at 10 Mb/s. Monitor the Switch and Network 639 User Manual