Netgear XSM4324FS User Manual - Page 649

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure the Syslog and Syslog Host Settings You can let the switch filter the messages that are forwarded, based on severity and generating component. You can also configure the syslog host settings. Configure the Syslog Settings To configure the syslog settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Logs > Syslog Configuration. The Status field displays whether the host was configure to be actively logging or not. 5. Select the Admin Status Disable or Enable radio button. This enables or disables logging to configured syslog hosts. When the Admin Status is disabled, the device does not relay logs to syslog hosts, and no messages are sent to Monitor the Switch and Network 649 User Manual