Netgear XSM4324FS User Manual - Page 631

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. In the VLAN ID field, enter the VLAN ID to which the binding must apply. 6. From the Direction menu, select the packet filtering direction. 7. In the Sequence Number field, enter an optional sequence number. You can specify an optional sequence number to indicate the order of this access list relative to other access lists that are already assigned to the VLAN ID and selected direction. A lower number indicates a higher precedence order. If a sequence number is already in use for the VLAN ID and selected direction, the specified access list replaces the currently attached ACL using that sequence number. If you do not specify a sequence number (the value is 0), a sequence number that is one greater than the highest sequence number currently in use for the VLAN ID and selected direction is used. The valid range is 1 to 4294967295. 8. From the ACL Type menu, select the type of ACL. Valid ACL types include IP ACL, MAC ACL, and IPv6 ACL. 9. From the ACL ID menu, select to display all the ACLs configured, depending on the ACL type selected. 10. Click the Add button. The VLAN ACL binding is added to the ACL VLAN Binding Table. Manage Switch Security 631 User Manual