Brother International WP7550JPLUS Owner's Manual - English - Page 14
Connecting
View all Brother International WP7550JPLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting the Equipment A CAUTION: Before plugging the Whisperwriter or monitor into an electrical outlet, connect the monitor and the modem to the Whisperwriter. Connecting the monitor 1. Push the monitor signal cable connector into the monitor connector. The monitor connector is located on the left side of the Whisperwriter. 2. Tighten the monitor signal cable connector's screws into the monitor connector to secure the monitor signal cable. Connecting the optional modem (Models WP-7550J and WP-7550) PLUS) 1. Push the modem data cable into the communication connector. 2. Tighten the modem data cable connector's screws into the communication CUILIICCLUL 3. Insert the modem telephone cord into the auxiliary socket of a telephone or into a telephone outlet. Connecting to power You can reverse the display from white to black and black to white bypressing the CODE # SHIFT ÷ R. Getting Started 6 1. Connect the DC jack into the DC plug connector. 2. Plug the monitor power cord and the AC adaptor power cord into an electrical outlet. 3. Press the green power button to turn on the monitor. If the power light does not glow, check the power cord. 4. Press the power switch on the left-rear side of the Whisperwriter to turn it on. If the system does not respond, check the power cord. 5. Adjust the screen brightness and contrast with the control knobs on the front of the monitor until the characters on the screen are easy to read. If any key has not been pressedforfive minutes, the screen will change to a "screen saver" toprotect the screen. To return to theprevious screen, press SHIFTor CODE.