Brother International WP7550JPLUS Owner's Manual - English - Page 177
Recording, Communication
View all Brother International WP7550JPLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Auto Log-In The first time you dial you must enter the log-in data manually. However, the log-in data can be recorded automatically by selecting ON from the RECORD LOG-IN DATA setting. The next time you dial the same number the auto log-in is carried out automatically. Recording Auto Log-In I. If RETURN is pressed on the Dial screen, the Communication screen appears and the machine will automatically dial the phone number. If Record Log-in Data is set to ON, it starts recording log-in data as shown below. CPF MEWF ILE M70528215720 CONNECT 2400 USER ID; WP00006 PASSWORD: ca HUM HI Recording log-in data....press CODE + Ft to stop recording log-in data. The log-in data cannot be edited in the same way as other data. To change the login data, you must restart the recording procedure for new data. Auto log-in data, which is recorded in memory, will be valid until exiting from the COMMUNICATIONmode. If you want to keep the auto login data permanently, please save it onto a diskette. 2. Press CODE + R to record the log-in data in memory. Iflog-in data is already recorded, it is deleted by pressing CODE 4- R and new log-in data is recorded If the log-in data exceeds the memory capacity, recording is stopped, and the window below appears. rvlarnory tun! Stop recording. Keep log-in data in memory? Use cursor to select and press RETURN_ [No] 3. Press YES to enter the log-in data which is already recorded into memory and then return to the Communication screen. Press NO to delete it and return to the Communication screen. Communication 169