Netgear XCM8806 Chassis Hardware Installation Guide - Page 1011
con ospf restart
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1011 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Configures the priority used in the designated router and backup designated router election algorithm for one or all OSPF interface(s) or for all the interfaces within the area. Syntax Description area-identifier vlan-name all priority Specifies an OSPF area. Specifies a VLAN name. Specifies all VLANs. Specifies a priority range. The range is 0 through 255. Default The default setting is 1. Usage Guidelines The range is 0 through 255, and the default setting is 1. Setting the value to 0 ensures that the router is never selected as the designated router or backup designated router. Example The following command sets all the interfaces in area 1.2.3.4 to not be selected as the designated router: configure ospf area 1.2.3.4 priority 0 configure ospf restart configure ospf restart [none | planned | unplanned | both] Description Configures the router as a graceful OSPF restart router. Syntax Description none planned unplanned both Do not act as a graceful OSPF restart router. Only act as a graceful OSPF restart router for planned restarts. Only act as a graceful OSPF restart router for unplanned restarts. Act as a graceful OSPF restart router for both planned and unplanned restarts. Chapter 23. OSPF Commands | 1011