Netgear XCM8806 Chassis Hardware Installation Guide - Page 986

NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines This command enables the exporting of static, direct, and OSPFv3-learned routes from the routing table into the RIPng domain. You can choose which types of OSPFv3 routes are injected, or you can simply choose ospfv3, which will inject all learned routes (of all types) for the selected protocol. The cost metric is inserted for all RIPng-learned, static, and direct routes injected into RIPng. If the cost metric is set to 0, the cost is inserted from the route table. The tag value is used only by special routing applications. Use 0 if you do not have specific requirements for using a tag. Each protocol can have a policy associated with it to control or modify the exported routes. The following is sample policy file which modifies the cost of redistributed routes from OSPFv3 and statically configured routes: entry filter_rt { If match any { Route-origin ospfv3; Route-origin static; } then { cost 10; } } Example The following command enables RIPng to redistribute routes from all OSPFv3 routes: enable ripng export ospfv3 cost 0 enable ripng originate-default enable ripng originate-default {always} cost {tag } Description Configures a default route to be advertised by RIPng. Syntax Description always cost tag Specifies to advertise the default route in addition to learned default route. Specifies a cost metric. The range is 1 - 15. Specifies a tag number. Default Disabled. 986 | Chapter 22. RIPng Commands