Netgear XCM8806 Chassis Hardware Installation Guide - Page 785
show stpd ports, STPD path cost
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 785 highlights
NETGEAR 8800 Chassis Switch CLI Manual Designated root: 00:00:00:00:00:00:00:00 0 External RootPathCost: 0 Root Port: MaxAge: 0s HelloTime: 0s CfgBrMaxAge: 20s CfgBrHelloTime: 2s 20 CfgBrMaxHopCount : 20 RootPathCost: ---- ForwardDelay: 0s CfgBrForwardDelay: 15s MaxHopCount: Topology Change Time: 35s Topology Change Detected: FALSE Number of Topology Changes: 0 Last Topology Change: 0s Hold time: Topology Change: 1s FALSE Time Since Participating Vlans : Auto-bind Vlans : (none) Default show stpd ports show {stpd} ports {[detail | {detail}]} Description Displays the STP state of a port. Syntax Description stpd_name port_list detail Specifies an STPD name. Specifies one or more ports or slots and ports. Specifies more detailed information about one or more ports of the STPD. Default N/A. Usage Guidelines This command displays the following: • STPD port configuration • STPD port encapsulation mode • STPD path cost • STPD priority • STPD state (root bridge, and so on) • Port role (root designated, alternate and so on) • STPD port state (forwarding, blocking, and so on) • Configured port link type • Operational port link type • Edge port settings (inconsistent behavior, edge safeguard setting) Chapter 17. STP Commands | 785