Netgear XCM8806 Chassis Hardware Installation Guide - Page 577
con radius shared-secret
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 577 highlights
NETGEAR 8800 Chassis Switch CLI Manual You can specify one pair of RADIUS authentication servers for switch management and another pair for network login. To specify RADIUS authentication servers for switch management (Telnet, SSH, and console sessions), use the mgmt-access keyword. To specify RADIUS authentication servers for network login, use the netlogin keyword. If you do not specify a keyword, switch management and network login use the same pair of RADIUS authentication servers. Example The following command configures the primary RADIUS server on host radius1 using the default UDP port (1812) for use by the RADIUS client on switch 10.10.20.30 using a virtual router interface of VR-Default: configure radius primary server radius1 client-ip 10.10.20.30 vr vr-Default The following command configures the primary RADIUS server for network login authentication on host netlog1 using the default UDP port for use by the RADIUS client on switch 10.10.20.31 using, by default, the management virtual router interface: configure radius netlogin primary server netlog1 client-ip 10.10.20.31 configure radius shared-secret configure radius {mgmt-access | netlogin} [primary | secondary] shared-secret {encrypted} Description Configures the authentication string used to communicate with the RADIUS authentication server. Syntax Description mgmt-access netlogin primary secondary encrypted string Specifies the switch management RADIUS authentication server. Specifies the network login RADIUS authentication server. Configures the authentication string for the primary RADIUS server. Configures the authentication string for the secondary RADIUS server. Indicates that the string is already encrypted. The string to be used for authentication. Default Unconfigured. Usage Guidelines The secret must be the same between the client switch and the RADIUS server. The RADIUS server must first be configured for use with the switch as a RADIUS client. Chapter 15. Security Commands | 577