Netgear XCM8806 Chassis Hardware Installation Guide - Page 77
con snmpv3 add target-addr
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Adds an entry to the snmpNotifyTable. Syntax Description hex_notify_name notify_name hex_tag tag volatile Specifies the notify name to add. The value is to be supplied as a colon separated string of hex octets. Specifies the notify name to add in ASCII format. Specifies a string identifier for the notifications to be sent to the target. The value is supplied as a colon separated string of octets. Specifies a string identifier for the notifications to be sent to the target in ASCII format. Specifies volatile storage. By specifying volatile storage, the configuration is not saved across a switch reboot. Default The default storage type is non-volatile. Usage Guidelines Use this command to add an entry to the snmpNotifyTable. When a notification is to be sent, this table is examined. For the target addresses that have been associated with the tags present in the table, notifications are sent based on the filters also associated with the target addresses. Example The following command sends notifications to addresses associated with the tag type1: configure snmpv3 add notify N1 tag type1 configure snmpv3 add target-addr configure snmpv3 add target-addr [[hex ] | ] param [[hex ] | ] ipaddress [ [ | ] | [ | ]] {transport-port } {from [ | ]} {vr } {tag-list } {volatile} Description Adds and configures an SNMPv3 target address and associates filtering, security, and notifications with that address. Chapter 3. Commands for Managing the Switch | 77