Netgear XCM8806 Chassis Hardware Installation Guide - Page 76

NETGEAR 8800 Chassis Switch CLI Manual Syntax Description hex_view_name view_name object_identifier subtree_mask included excluded volatile Specifies the MIB view name to add or modify. The value is to be supplies as a colon separated string of hex octets. Specifies the MIB view name to add or modify in ASCII format. Specifies a MIB subtree. Specifies a hex octet string used to mask the subtree. For example, f7a indicates 1.1.1.1.0.1.1.1.1.0.1.0. Specifies that the MIB subtree defined by / is to be included. Specifies that the MIB subtree defined by / is to be excluded. Specifies volatile storage. Default The default mask value is an empty string (all 1s). The other default values are included and non-volatile. Usage Guidelines Use this command to create a MIB view into a subtree of the MIB. If the view already exists, this command modifies the view to additionally include or exclude the specified subtree. In addition to the created MIB views, there are three default views. They are: defaultUserView, defaultAdminView, and defaultNotifyView. Example The following command creates the MIB view allMIB with the subtree 1.3 included as non-volatile: configure snmpv3 add mib-view allMIB subtree 1.3 The following command creates the view netgearMib with the subtree 1.3.6.1.4.1.1916 included as non-volatile: configure snmpv3 add mib-view netgearMib subtree 1.3.6.1.4.1.1916 The following command creates a view vrrpTrapNewMaster which excludes VRRP notification .1 and the entry is volatile: configure snmpv3 add mib-view vrrpTrapNewMaster 1.3.6.1.2.1.68.0.1/ff8 type excluded volatile configure snmpv3 add notify configure snmpv3 add notify [[hex ] | ] tag [[hex ] | ] {volatile} 76 | Chapter 3. Commands for Managing the Switch