Netgear XCM8806 Chassis Hardware Installation Guide - Page 590
con tacacs-accounting shared-secret
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 590 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description primary secondary ipaddress hostname tcp_port ipaddress vr_name Configures the primary TACACS+ accounting server. Configures the secondary TACACS+ accounting server. The IP address of the TACACS+ accounting server being configured. The host name of the TACACS+ accounting server being configured. The TCP port to use to contact the TACACS+ server. The IP address used by the switch to identify itself when communicating with the TACACS+ accounting server. Specifies the virtual router on which the client IP is located. Note: User-created VRs are supported only on the platforms listed for this feature in Appendix A in the NETGEAR 8800 User Manual. Default Unconfigured. The default virtual router is VR-Mgmt, the management virtual router. Usage Guidelines You can use the same TACACS+ server for accounting and authentication. To remove a server, use the following command: unconfigure tacacs server [primary | secondary] Example The following command configures server tacacs1 as the primary TACACS+ accounting server for client switch 10.10.20.35 using a virtual router interface of VR-Default: configure tacacs-accounting primary server tacacs1 client-ip 10.10.20.35 vr vr-Default configure tacacs-accounting shared-secret configure tacacs-accounting [primary | secondary] shared-secret {encrypted} Description Configures the shared secret string used to communicate with the TACACS+ accounting server. Syntax Description primary Configures the authentication string for the primary TACACS+ accounting server. 590 | Chapter 15. Security Commands