Netgear XCM8806 Chassis Hardware Installation Guide - Page 780
enable stpd ports, Enable the CIST.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 780 highlights
NETGEAR 8800 Chassis Switch CLI Manual • Create the MSTP region. • Create the STPD to be used as the CIST, and configure the mode of operation for the STPD. • Specify the priority for the CIST. • Enable the CIST. The following example enables autobind on the VLAN Default for the CIST STPD named s1: configure mstp region 1 create stpd s1 configure stpd s1 mode mstp cist configure stpd s1 priority 32768 enable stpd s1 The following example enables autobind on the VLAN math for the MSTI STPD named s2: create vlan math configure vlan math tag 2 configure vlan math add ports 2-3 configure mstp region 1 create stpd s2 configure stpd s2 mode mstp msti 1 configure stpd s2 priority 32768 enable stpd s2 auto-bind vlan math configure stpd s2 ports link-type point-to-point 5-6 enable stpd s2 enable stpd ports enable stpd ports [all | ] Description Enables the STP protocol on one or more ports. Syntax Description stpd_name all port_list Specifies an STPD on the switch. Specifies all ports for a given STPD. Specifies one or more ports or slots and ports. Default Enabled. Usage Guidelines If you create an STPD with a unique name, the keyword stpd is optional. 780 | Chapter 17. STP Commands