Netgear XCM8806 Chassis Hardware Installation Guide - Page 578

NETGEAR 8800 Chassis Switch CLI Manual The mgmt-access keyword specifies the RADIUS server used for switch management authentication. The netlogin keyword specifies the RADIUS server used for network login authentication. If you do not specify the mgmt-access or netlogin keywords, the secret applies to both the primary or secondary switch management and netlogin RADIUS servers. The encrypted keyword is primarily for the output of the show configuration command, so the shared secret is not revealed in the command output. Do not use it to set the shared secret. Example The following command configures the shared secret as "purplegreen" on the primary RADIUS server for both switch management and network login: configure radius primary shared-secret purplegreen The following command configures the shared secret as "redblue" on the primary switch management RADIUS server: configure radius mgmt-access primary shared-secret redblue configure radius timeout configure radius {mgmt-access | netlogin} timeout Description Configures the timeout interval for RADIUS authentication requests. Syntax Description mgmt-access netlogin seconds Specifies the switch management RADIUS authentication server. Specifies the network login RADIUS authentication server. Specifies the number of seconds for authentication requests. Range is 3 to 120 seconds Default The default is 3 seconds. Usage Guidelines This command configures the timeout interval for RADIUS authentication requests. When the timeout has expired, another authentication attempt will be made. After three failed attempts to authenticate, the alternate server will be used. After six failed attempts, local user authentication will be used. The mgmt-access keyword specifies the RADIUS server used for switch management authentication. 578 | Chapter 15. Security Commands