Netgear XCM8806 Chassis Hardware Installation Guide - Page 420

NETGEAR 8800 Chassis Switch CLI Manual Description Resets all the sFlow values to the default values. Syntax Description This command has no arguments or variables Default The default values for sFlow are as follows: • sFlow agent IP address-0.0.0.0 • sampling frequency-sample one every 8196 packets • polling interval-20 seconds • maximum CPU sample limit-2000 samples per second sFlow is unconfigured and disabled on all ports. Usage Guidelines This command resets sFlow values to the default values, and removes any port configurations, and any sFlow collectors configured on the switch. Example The following command unconfigures sFlow: unconfigure sflow unconfigure sflow agent unconfigure sflow agent Description Resets the sFlow agent's IP address to the default value. Syntax Description This command has no arguments or variables. Default The default IP address is 0.0.0.0. Usage Guidelines This command resets the sFlow agent IP address to its default value. 420 | Chapter 8. Commands for Status Monitoring and Statistics