Netgear XCM8806 Chassis Hardware Installation Guide - Page 504
disable access-list refresh blackhole, enable access-list permit to-cpu, If you disable this feature
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 504 highlights
NETGEAR 8800 Chassis Switch CLI Manual disable access-list permit to-cpu disable access-list refresh blackhole disable access-list refresh blackhole Description Disables blackholing of packets during ACL refresh. Syntax Description This command has no arguments or variables. Default The feature is enabled. Usage Guidelines When access control lists (ACLs) are refreshed, this feature provides that any packets arriving during the refresh will be blackholed. If you disable this feature, the ACLs will be refreshed as described in the refresh policy command. To enable this feature, use the following command: enable access-list refresh blackhole Example The following command disables dropping of packets during an ACL refresh: disable access-list refresh blackhole enable access-list permit to-cpu enable access-list permit to-cpu Description Enables control packets to reach CPU, even if an ACL would deny them. Syntax Description This command has no arguments or variables. Default Enabled. 504 | Chapter 13. ACL Commands