Netgear XCM8806 Chassis Hardware Installation Guide - Page 465
enable snmp traps fdb mac-tracking, show fdb, Displays FDB entries.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 465 highlights
NETGEAR 8800 Chassis Switch CLI Manual enable snmp traps fdb mac-tracking enable snmp traps fdb mac-tracking Description Enables SNMP trap generation when MAC-tracking events occur for a tracked MAC address. Syntax Description This command has no arguments or variables. Default Disabled. Usage Guidelines None. Example The following command enables SNMP traps for MAC-tracking events: enable snmp traps fdb mac-tracking show fdb show fdb {blackhole {netlogin [all | mac-based-vlans]} | netlogin [all | mac-based-vlans] | permanent {netlogin [all | mac-based-vlans]} | {netlogin [all | mac-based-vlans]} | ports {netlogin [all | mac-based-vlans]} | vlan {netlogin [all | mac-based-vlans]}} Description Displays FDB entries. Syntax Description blackhole slot num_entries netlogin all netlogin mac-based-vlans permanent Displays the blackhole entries. (All packets addressed to these entries are dropped.) Specifies a slot in the switch. Specifies the maximum number of hardware entries to display. The range is 1 to 25. Displays all FDBs created as a result of the netlogin process. Displays all netlogin MAC-based VLAN FDB entries. See Chapter 16, "Network Login Commands," for more information on netlogin. Displays all permanent entries, including the ingress and egress QoS profiles. Chapter 10. FDB Commands | 465