Netgear XCM8806 Chassis Hardware Installation Guide - Page 1341
use configuration, Con s the switch to use a previously saved configuration on the next reboot.
View all Netgear XCM8806 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1341 highlights
NETGEAR 8800 Chassis Switch CLI Manual • Alphabetical letters, upper case and lower case (A-Z, a-z) • Numerals (0-9) • Period ( . ) • Dash ( - ) • Underscore ( _ ) • Slash ( / ) Permitted only for remote files When naming a remote file, remember the requirements previously described. Example The following command uploads the current switch configuration as an ASCII-based file named configbackup.xsf to the TFTP server with an IP address of 10.10.10.10: upload configuration 10.10.10.10 configbackup.xsf If you successfully upload the configuration to the TFTP server, the switch displays a message similar to the following: Uploading configbackup.xsf to 10.10.10.10 ... done! use configuration use configuration [primary | secondary | ] Description Configures the switch to use a previously saved configuration on the next reboot. Syntax Description primary secondary file_name Specifies the configuration file named primary.cfg. Specifies the configuration file named secondary.cfg. Specifies an existing user-defined configuration file name (displays a list of available user-defined configuration files). Default N/A. Usage Guidelines XML-based configuration files have a .cfg file extension. When you enter the name of the file in the CLI, the system automatically adds the .cfg file extension. Do not use this command with ASCII-formatted configuration files. Those configuration files have an .xsf file extension. For more information about using and saving ASCII-formatted configuration files see the upload configuration [ | ] {vr } and the load script {arg1} {arg2} ... {arg9} commands. Appendix A. Configuration and Image Commands | 1341